March 10, 2009
With the promotion and popularization of air source heat pumps in daily life, air source heat pump equipment has been accepted by more and more customers. Whether in factories, schools, gymnasiums, office buildings, etc., it has gradually been recognized, and many families have also begun to slowly accept air source heat pumps. So what maintenance tips should be paid attention to for air source heat pumps? Leomon sorted out tips for air source heat pump maintenance.
The air source heat pump is mainly an air source heat pump unit composed of an outdoor unit and an insulated water tank. The air source heat pump mainly converts the heat in the air into energy, and then makes hot water through the air source heat pump. As a new high-tech environmental protection technology, Leomon air source heat pump plays an important role in the "coal to electricity" project in northern my country.
1. Air source heat pumps need to regularly check the wiring problems of the power supply and electrical system, and pay attention to problems with the lines and electrical components.
2. Regularly check the waterway of the filter to ensure the cleanliness of the water source and avoid blockage.
3. Be careful not to block the air inlet and outlet with debris.
4. Regularly check the interface positions such as water replenishment and water tank safety valve to ensure that the interface is normal.
5. Regularly check the working conditions of each component to check for oil leakage.
6. Keep the area around the heat pump clean and dry to ensure the normal inflow and outflow of air.
7. If the downtime is long, the water in the unit pipeline should be drained, the power should be cut off, and the protective cover should be put on. When running again, conduct a comprehensive inspection of the system before starting.
8. When the actual outlet water temperature of the air source heat pump is inconsistent with the value displayed on the unit control panel, please check whether the temperature sensing device is in good contact.
9. The water tank needs to be cleaned of scale after a period of use (usually 3 months, depending on the local water quality).
