The ultra-low temperature air source heat pump is based on a single two-stage screw heat pump compressor, a true two-stage enthalpy increase compression technology, breaking through the limits of traditional applications, higher outlet water temperature, lower ambient temperature, and energy efficiency up to 2.2 at -30℃, a revolutionary technological breakthrough in low-temperature heating systems.
What are the advantages of ultra-low temperature air source heat pumps over common air source heat pumps?
1. Fearless of severe cold
The ultra-low temperature air source heat pump uses a single two-stage screw heat pump compressor with cutting-edge technology to break the industry dilemma of insufficient high-temperature outlet water and inability to operate at low ambient temperatures.
2. Highest water temperature
At a severe cold temperature of -35℃, 65℃ hot water can be produced; at a cold temperature of -25℃, 70℃ hot water can be produced. Among similar products on the market, the outlet water temperature is the highest.
3. Environmentally friendly refrigerant
The ultra-low temperature air source heat pump uses environmentally friendly refrigerant, which is pollution-free, does not emit harmful substances, reduces carbon dioxide emissions by more than 40%, and is environmentally friendly and safe.
4. High efficiency and energy saving
The energy efficiency ratio reaches 3.0 under the nominal working condition of -12℃, which can convert the consumed electric energy into 3 times the heat energy to achieve heating, efficient heating, and minimize the electric energy consumption for users.
5. Intelligent defrosting
It can automatically adjust the defrosting cycle and the start and end time of defrosting, as well as the load during defrosting, and defrost efficiently and stably.
6. Large heating area
The heating effect is equivalent to 8 20HP air source heat pumps, creating a warm and comfortable living space for users. The maximum heating area of a single unit can reach 10,000 square meters.
7. Large heating capacity and high energy efficiency
The maximum heating capacity of R134a single unit is 350KW, and the maximum heating capacity of R22 single unit is 700KW. Among similar products on the market, the single unit has the largest heating capacity.
8. Intelligent control
Intelligent control of unit start and stop, compressor capacity adjustment, full-function fault alarm and automatic fault diagnosis, to achieve unmanned operation.
9. Ultra-quiet
The finely processed two-stage screw of the compressor is tightly engaged and runs smoothly. A special shock absorber is installed at its bottom and the base of the unit. A soundproof cover can also be installed according to user needs, which greatly reduces the noise of the compressor and limits the vibration from spreading outward.
10. Widely used in various buildings, including residences, shopping malls, hotels, office buildings, hospitals, schools, etc.
The ultra-low temperature air source heat pump is based on a single two-stage screw heat pump compressor, a true two-stage enthalpy increase compression technology, breaking through the limits of traditional applications, higher outlet water temperature, lower ambient temperature, and energy efficiency up to 2.2 at -30℃, a revolutionary technological breakthrough in low-temperature heating systems.
What are the advantages of ultra-low temperature air source heat pumps over common air source heat pumps?
1. Fearless of severe cold
The ultra-low temperature air source heat pump uses a single two-stage screw heat pump compressor with cutting-edge technology to break the industry dilemma of insufficient high-temperature outlet water and inability to operate at low ambient temperatures.
2. Highest water temperature
At a severe cold temperature of -35℃, 65℃ hot water can be produced; at a cold temperature of -25℃, 70℃ hot water can be produced. Among similar products on the market, the outlet water temperature is the highest.
3. Environmentally friendly refrigerant
The ultra-low temperature air source heat pump uses environmentally friendly refrigerant, which is pollution-free, does not emit harmful substances, reduces carbon dioxide emissions by more than 40%, and is environmentally friendly and safe.
4. High efficiency and energy saving
The energy efficiency ratio reaches 3.0 under the nominal working condition of -12℃, which can convert the consumed electric energy into 3 times the heat energy to achieve heating, efficient heating, and minimize the electric energy consumption for users.
5. Intelligent defrosting
It can automatically adjust the defrosting cycle and the start and end time of defrosting, as well as the load during defrosting, and defrost efficiently and stably.
6. Large heating area
The heating effect is equivalent to 8 20HP air source heat pumps, creating a warm and comfortable living space for users. The maximum heating area of a single unit can reach 10,000 square meters.
7. Large heating capacity and high energy efficiency
The maximum heating capacity of R134a single unit is 350KW, and the maximum heating capacity of R22 single unit is 700KW. Among similar products on the market, the single unit has the largest heating capacity.
8. Intelligent control
Intelligent control of unit start and stop, compressor capacity adjustment, full-function fault alarm and automatic fault diagnosis, to achieve unmanned operation.
9. Ultra-quiet
The finely processed two-stage screw of the compressor is tightly engaged and runs smoothly. A special shock absorber is installed at its bottom and the base of the unit. A soundproof cover can also be installed according to user needs, which greatly reduces the noise of the compressor and limits the vibration from spreading outward.
10. Widely used in various buildings, including residences, shopping malls, hotels, office buildings, hospitals, schools, etc.
