Features of 15P EVI Air Source Heat Pump
Low temperature air source heat pump heating unit core technology corrugated fin evaporator: The use of Hydrophilic s-type corrugated fin, heat absorption area increased by 30% , heat transfer efficiency is higher. Efficient economic heat exchanger: with economic heat exchanger device, the use of circulation media can more fully evaporation, absorb more heat. Valley Wheel jet enthalpy booster compressor: specially designed to adapt to high compression ratio, high pressure difference, and through EVI control safe exhaust temperature. AIR-JET ENTHALPY-INCREASING TECHNOLOGY: Adopting the air-jet enthalpy-increasing compressor with middle injection can reduce the scroll temperature of the compressor and increase the heat capacity.
MULTI-PROTECTION TECHNOLOGY: High and low voltage protection, over-heat overload protection, phase sequence protection, water flow switch protection, pressure switch protection, anti-freezing protection. Intelligent defrosting technology: According to the evaporator copper tube temperature automatically into or out of the defrosting process, to avoid the "frost-free defrosting" situation. Remote Control Technology: Even if not at home, but also on the phone at any time, anywhere, at will control the home temperature. To achieve a key switch, remote temperature control, timing switch, energy consumption statistics and other functions to enhance human-computer interaction. Multiple quiet noise reduction technology: FULL SYSTEM SOUND-ABSORBING INSULATION, host buffer base, forward-swept Wing anti-flutter Axial Fan, sheet metal sound-absorbing design. DC FREQUENCY CONVERSION TECHNOLOGY: Using DC frequency conversion compressor, Fan Motor, control module, energy-saving effect significantly improved, running noise significantly reduced, more reliable operation, more accurate operation regulation. AIR-JET ENTHALPY-INCREASING TECHNOLOGY: At low temperature, it can effectively increase the heat production and reduce the scroll temperature of the compressor, ZW series heat pump compressor, working environment temperature-25 °C, water temperature up to 60 °C.
Functional Mode 1. Air conditioning heating or cooling mode 2. Air conditioning refrigeration + domestic hot water mode 3. Air Conditioning heating + living heat: water mode 4. Independent system hot water model product features air conditioning refrigeration + hot water model, the air conditioning should be discharged into the outdoor waste heat recovery for the production of hot water, the unit cooling side of the hot water heating without additional electricity consumption, multi-purpose machine. Air-conditioning heating + domestic hot water mode, priority heating heating, automatic switch to achieve the temperature of domestic hot water.
For further specification of 15P EVI Air Source Heat Pump, welcome to contact us!
Low temperature hot water unit parameters | |
Spec. | DKFXRS-11I/R |
Nominal heating capacity at room temperature(kW) | 113 |
Nominal heating at room temperature(kW) | 2.56 |
Low-temperature nominal heating capacity(kW) |
4.8 |
Low temperature nominal heating(kW) | 2.1 |
Maximum input power(kW) | 4.2 |
Maximum current(A) | 23 |
Power Specifications(Hz) | 220V ~ 50 |
Refrigerant/charge amount | R22/5600g |
noisedb(A) | <62 |
Water resistancekPa | <55 |
Anti-shock level | I |
waterproof level | IPX4 |
Caliber of inlet and outlet |
DN32 |
Unit size (mm) | 1030x410x1390 |
Unit Weight(kg) | 142 |
15P EVI Air Source Heat Pump,